Intelligent design with highly resistant PTFE lips makes the SeccoLip a perfect solution

When problems are encountered with nitrogen supply in production, such as low or fluctuating pressure, it can be useful to switch to a lip seal.

KeyVisual_CaseStudy_SeccoLip in the chemical industry
Situation:

Problems with nitrogen supply in the production of flame retardants.

Challenge:

Sealing of a production reactor with fluctuating nitrogen pressure.

Solution:

SeccoLip with highly resistant PTFE lips.

ICL-IP Bitterfeld is an international chemical company and producer of inorganic phosphorus chemicals and flame retardants. Bitterfeld is considered the birthplace of the German phosphorus industry. Flame retardants are used primarily in the construction industry, furniture and vehicle manufacturing, and the electrical industry. Intermediate products such as phosphorus trichloride, phosphorus oxychloride and phosphonic acid are also produced here. The plant equipment used at ICL Bitterfield includes a production reactor that was initially sealed with an AGS481-type gas seal. To operate the AGS safely, a differential pressure of 3 bar is required between the barrier chamber and the vessel. With a maximum boiler pressure of 1 bar, a buffer pressure of 4 bar must be provided at the seal. In addition, the pressure control valve (PCV) installed in the gas supply system needs an inlet pressure of 1.5 to 2 bar above the established barrier pressure. Add all these pressures together, and the required nitrogen pressure is approximately 6 bar. However, the available nitrogen pressure in the loop line on the container was only 2.8 bar. As a result, the seal failed every 6 months. The optimization measures attempted over time, such as installing a pressure increase station, did not produce the desired results, and relatively frequent repairs were required due to heavy wear.

The search for an alternative solution focused quickly on the newly introduced lip seal SeccoLip. Compared with dry-running mechanical seals, for which a differential pressure of 2 bar is recommended, the SeccoLip can be operated at a significantly lower differential pressure. That is especially useful for these kinds of applications. Another decisive factor was the chemical resistance of the PTFE lips used in the SeccoLip seal. In combination with Hastelloy parts used in contact with this product, SeccoLip can be safely used with aggressive media such as those found in the processes at ICL.

The current shape of the lips is the result of extensive material testing, optimizations, and trials as well as EagleBurgmann’s many years of experience. The patented combination of PTFE sealing lip and rolling bearing in a single component allows for shaft compensation without additional compensation elements. The innovative design and optimized material pairing offer an intelligent alternative to typical solutions.

The SeccoLip has a modular design that enables unpressurized operation and connection of a gas supply system. The GSS4010 supply system used at ICL-IP is a combination of a flushing and buffer system that was specially developed for SeccoLip. SeccoLip was fitted with 3 lips for compatibility with this system. The first lip faces toward the product, the second faces outwards, and the third also faces the product. This arrangement enables the connection of a flushing system at the first lip and a barrier system at the second and the third lip.

 

After successful commissioning of SeccoLip in the plant, nitrogen consumption stabilized compared with the gas seal. The seal has performed reliably ever since. Monitoring of pressure and flow ensures that this will remain the case. The operator is also pleased by the reduced nitrogen consumption. Clearly, the switch to the dry-running SeccoLip was a success in many respects.

Operating conditions

  • Shaft diameter: d = 100 mm (3.94”)
  • Pressure: Max. 1 bar(g) (14.5 PSIG)
  • Temperature: t = Max. 75 °C (167 °F)
  • Speed: n = 80 rpm

Solution: SeccoLip in the chemical industry

PDF download - 744.2 KB

SeccoLip - Product Leaflet

Lip seal for agitators, mixers and reactors. 

PDF download - 3.3 MB

Further reference projects

KeyVisual_CaseStudy_Hengli.jpg
China, Mainland

10 years ahead

Between June 2017 and March 2019 the Hengli Group constructed an integrated refining and chemical complex in the Chinese harbor town Dalian where 20 million tons of crude oil are processed every year. EagleBurgmann advised the company Hengli concerning the selection of mechanical seals and supply systems for the whole plant and supplied more than 95 % of the components in use. 

Read the complete case study
KeyVisual_CaseStudy_National Grid
United Kingdom

10 years of reliability: Protecting the heart of Great Britain’s natural gas infrastructure from failure

In Great Britain, a shortage in natural gas supply has severe consequences: Since the country switched from coal-fired to gas-fired power stations, a gas supply shortage makes households and industrial consumers not only vulnerable to failing heating and gas stoves, but also to power outages. Companies along the value and transportation chain of natural gas are therefore especially dependent on reliable equipment.

Read the complete case study
Feuer und Flamme_DRO_Head3
Germany

100 percent performance at 300 degrees

Things get hot in rotary kilns, very hot in fact. In the production of cement, for example, the thermometer measures more than 1,000 degrees Celsius. Sealing systems from EagleBurgmann, a company of the Freudenberg Group and EKK, make sustainable contributions to environmental protection, energy efficiency and process reliability under these "fiery" high-temperature conditions.

Read the complete case study
KeyVisual_CaseStudy_RamcoCement.jpg
India

A Partnership to build on

Our modern civilization is quite literally built upon cement. Today, building materials made from cement are used in buildings, roads, bridges, dams etc. Cement production is a heat-intensive process and causes thermal expansion in duct systems. To compensate this, Indian cement producer Ramco Cement needed fabric expansion joints with a diameter of several meters for two of their plants. On the basis of a close collaboration, EagleBurgmann was able to design components that increase the efficiency of the plant in the long run.

Read the complete case study
KeyVisual_RoTechBooster_Dock_Sud
Argentina

Clean gas despite fluctuating operating conditions

Frequent starts and stops are a severe test for gas-lubricated compressor seals. Installed in an Argentinean combined cycle power plant is an EagleBurgmann supply system that provides a continuous gas flow rate for the seals and adapts it to changing conditions. Since then, the operational reliability of the compressors has increased significantly.

Read on for the entire case study
KeyVisual_CaseStudy_AGSR_Schaufeltrockner.jpg
Germany

Clean sealing solution for demanding crystal production

Seals are a risk factor in the production of liquid crystals. If there is even the slightest contamination of the liquid crystals, this will later affect the image quality of the display. Read on to see which sealing solution Merck KGaA uses in paddle dryers for the production of liquid crystals.

Read on for the entire case study
Show all references
Newsletter

Excellence in Practice

With our free e-mail newsletter „Excellence in Practice“, you will receive first-hand information about current products, services, references and worthwhile industry insights.